Gage Bilt 1753 원본 사용 설명서 - 페이지 4

{카테고리_이름} Gage Bilt 1753에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gage Bilt 1753 20 페이지. Installation tool

WARNING:

Any other use is forbidden.

The GB722 is a pneumatic-hydraulic installation tool designed specifically for the efficient installation of blind fasteners. It weighs

5.50 lbs. (2.49 kg) and can be operated in any position. It has a .590" (15.0 mm) fastener setting stroke and a rated pull load of 4700 lbs.

(20.91 kN) with 90 psi (6.2 bar) air pressure at the air inlet.

The GB722 installation tool operates on 90 to 100 psi (6.2-6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the maximum efficiency.

At 90 psi. (6.2 bar) air pressure, the GB722 does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).

The air inlet is provided with 1/4-18 female pipe thread to accept the users air hose fitting.

NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (SEE NOSE ASSEMBLY SELECTION

CHART ON PG. 18).

WARNING:

Do not operate in an explosive atmosphere.

The GB722 can be operated between 0ºF — 118ºF (-17.8ºC / 47.8ºC)

GB722 S/N: 1753 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Weight

- 5.50 lbs. (2.49 kg)

Air pressure req'd

- 90-100 psi. (6.2-6.9 bar)

Air consumption

- .16 SCF/cycle (4.53 L/cycle)

Hydraulic oil

- Automatic Transmission Oil,

Setting stroke

- .590" (15.0 mm)

Rated pull load

- 4,700 lbs. (20.91 kN)

Noise level

- 81.5 dB(A)

Vibration

- Tested– No Hazards Found.

Dexron III, or equivalent.

REV. 5/22