Hi Capacity Power Products Ultra-Fast Camcorder/Digital Camera Battery Charger 사용자 설명서 - 페이지 3

{카테고리_이름} Hi Capacity Power Products Ultra-Fast Camcorder/Digital Camera Battery Charger에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi Capacity Power Products Ultra-Fast Camcorder/Digital Camera Battery Charger 4 페이지. Ultra-fast camcorder/digital camera battery charger

페이지 인쇄

The following diagram shows the battery contacts used for different Li-ion batteries.

3. To charge additional types of camcorder and digital camera batteries, simply

attach the appropriate adapter plate onto the base unit. Slide the front end of the

plate into the front of the charger (Fig A). After the plate is in place, push down on

the back of the plate(Fig B). This will lock the plate into place.

4. To remove the plate from the charger, push up on the notch at the back of the

plate (Fig C). Pull on the back of the plate outwards while holding the front of the

charger (Fig D).

5. Connect the barrel-plug end of the AC adapter or DC car cord into the back

of the charger and the other end into a standard AC outlet or the cigarette

lighter receptacle of a vehicle. The AC plug symbol (Fig E) in the LCD display

of the charger will appear as soon as the charger unit is connected to a power

source. The symbol indicates the charger is ready for use.

6. Attach your camcorder or digital camera battery onto the charger or onto the

adapter plate and make sure the battery contacts connect with the contact pins.

Make sure that the latching on your battery slides completely under the tabs on

the charger plate. If the battery is properly connected the LCD fuel gauge will start

flashing, indicating that the battery is charging.

7. The solid bars of the fuel gauge (Fig F) denote the percentage of the

capacity charged and the flashing bar indicates the portion being charged.

When all the bars are solid the battery is fully charged.

Fig A

Fig C

Ultra-Fast Camcorder/Digital Camera Battery Charger - User's Manual

Fig B

Fig D

Fig E

Fig F