Gage Bilt GB568 원본 사용 설명서 - 페이지 4

{카테고리_이름} Gage Bilt GB568에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gage Bilt GB568 16 페이지. Installation tool
Gage Bilt GB568에 대해서도 마찬가지입니다: 원본 사용 설명서 (20 페이지)

페이지 인쇄

WARNING:

Any other use is forbidden.

The GB568 and the GB568A are hydraulic installation tools designed specifically for the efficient installation of HUCKRIMP® (krimpnuts)

with a crimping action that deforms the nut to provide accurate installation loads. They weigh just over 2.5 lbs. (1.13kg) and can be operated

in any position. They have up to a .300" (7.6 mm) fastener setting stroke and a rated pull load of 5,940 lbs. (26.4 kN).

The GB568 installation tool operates on hydraulic pressure developed by a Powerunit set at 6,000 psi. (414.0 bar) maximum PULL

pressure. The tool comes equipped with a 12 feet (3.65 m) of hydraulic hose with quick disconnects and a electric control cord assembly.

The GB568A installation tool operates on hydraulic pressure developed by the GB910 & GB912 Powerunits set at 6,000 psi. (414.0 bar)

maximum PULL pressure. The tool comes equipped with a 12 feet (3.65 m) of hydraulic hose with quick disconnects and an air line

assembly.

NOSE ASSEMBLIES ARE NOT FURNISHED WITH THE TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection

chart on pg. 14).

WARNING:

Do not operate in an explosive atmosphere.

The GB568 & GB568(A) can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)

GB568 INSTALLATION TOOL

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Weight

Hyd. Pressure Req'd.

Hyd. Power Source

Hydraulic Oil

Setting Stroke

Rated Pull Load

- 2.5 lbs. (1.13 kg)

- 6,000 (414.0 bar) MAX. PULL (Tool spring RETURN)

- GB910, GB912 or GB940

Powerunit or equivalent.

- See hydraulic pump instructions.

See powerunit for hydraulic oil specifications

- up to .300" (7.6 mm)

- 5,940 lbs. (26.4 kN)

Rev. 6/22