Gage Bilt GB704SR-8 설치 매뉴얼 - 페이지 10

{카테고리_이름} Gage Bilt GB704SR-8에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gage Bilt GB704SR-8 14 페이지.

HEAD

Remove nose assembly from tool before attempting disassembly of head cylinder assy (704183).

Remove end cap (704112). Push against threaded end of piston (704507) to slide it out of head cylinder assy (704183). Be careful not

to damage threads or cause burrs on polished piston rod surface.

WARNING:

Dispose of Hydraulic Oil in accordance with applicable regulations.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the

socket head cap screws (400061 and 400066) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

704101

NOSE FITTING

704002

EXTENSION ASSY

HEAD CYLINDER

S832 - O'RING

704129 - GASKET

402482 - BUTTON

HEAD CAP SCREW

S572 - STAT-O-SEAL

744306 - MANIFOLD-HEAD ASSY

704130 - AIR ACTUATOR ASSY

S/N: 1088 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

A-193 - O'RING

704183

ASSY

400061

SOCKET HEAD

CAP SCREW (2)

S829 - O'RING

A-1118 - POLYSEAL

(O'RING IN POLSYSEAL

MUST FACE IN

THIS DIRECTION)

401086 - BACK-UP RING

401816 - PLUG

204304 - SWIVEL ASSY

(INCLUDES 401080 & 403764)

A-317

HYDRAULIC HOSE

724017 LEVER ASSY

400066

S572 - STAT-O-SEAL (2)

704112 - END CAP

400789 - O'RING

704507 - PISTON

204304 - SWIVEL ASSEMBLY

401080 - BACK-UP RING

703560 - HOSE GUARD (NOT SHOWN)

704311 - AIR LINE

A-144

HOSE CLAMP (2)

S1181

BARBED FITTING (2)

744303 - MANIFOLD-HANDLE

402482

BUTTON HEAD

CAP SCREW (2)

200232

DEFLECTOR

403764 - O'RING

A-663 - HANGER

11/11 Rev. 9/14