Gage Bilt GB703SRVT/6N10E 사용자 설명서 - 페이지 9
{카테고리_이름} Gage Bilt GB703SRVT/6N10E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gage Bilt GB703SRVT/6N10E 14 페이지. Installation tool
페이지 인쇄OVERHAUL
WARNING:
Disconnect tool from its power source before performing overhaul.
WARNING:
Tool must be maintained in a safe working condition at all times and examined on a regular daily
basis for damage or wear. Any repair should be done by qualified personnel trained on Gage Bilt
procedures.
WARNING:
When operating, repairing or overhauling tool, wear approved eye protection. Do not look in
front of tool or rear of tool when installing fastener.
WARNING:
Depress lever assy and disconnect from air, with the piston in the rear position, before overhaul.
Severe personal injury may occur if air hose is not disconnected.
piston rod assembly downward with head cylinder assembly removed. Hydraulic oil will eject
forcibly from handle.
The disassembly and re-assembly procedure can be accomplished by utilizing the following instructions and drawings.
Use extreme care during disassembly and re-assembly not to mar or nick any smooth surface that comes in contact
with seals. Before installing seals, always apply a good lubricant, such as Lubriplate®, to the surfaces. It is recom-
mended that tool kit (GB704TK) be used to facilitate overhaul. A complete overhaul can be achieved by the use of Ser-
vice Kit 703043 which contains a complete set of o'rings, back-up rings, screws, washers and gasket.
704214
STEM CATCHER BAG
PISTON ROD WRENCH
704151
POWER CYLINDER TOOL
704149
PACKING PLUG WRENCH
(704214 CATCHER BAG AS SHOWN ABOVE IS SOLD SEPARATELY)
GB704TK Service Tool Kit Includes:
Part No.
704149
704150
704151
704152
704153
S1178
704162
704163
704152
SEAL GUIDE
704150
BLEEDER BOTTLE
Description
Piston Rod Wrench
Packing Plug Wrench
Power Cylinder Tool
Seal Guide
Bleeder Bottle
Valve Extractor
Valve Spring Installation Tool
Valve Sleeve Removal Tool
9
USE CAUTION
704162
VALVE SPRING
INSTALLATION TOOL
704153
VALVE SLEEVE
REMOVAL TOOL
when forcing
S1178
VALVE EXTRACTOR
704163
8/14