Gage Bilt GB714 원본 사용 설명서 - 페이지 4

{카테고리_이름} Gage Bilt GB714에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gage Bilt GB714 20 페이지.

WARNING:

Any other use is forbidden.

The GB714 is a pneumatic-hydraulic tool designed specifically for the efficient installation of blind rivets and lockbolt fasteners. It weighs

6.50 lbs. (2.9 kg) and can be operated in any position. It has a .590" (15 mm) fastener setting stroke and a rated pull load of 6,400 lbs. (28.4 kN)

with 90 psi (6.2 bar) air pressure at the air inlet.

The GB714 installation tool operates on 90 to 100 psi (6.2-6.9 bar) of air pressure with 90 psi (6.2 bar) providing the maximum efficiency.

At 90 psi (6.2 bar) of air pressure, the GB714 does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).

The air inlet is provided with 1/4-18 female pipe thread to accept the users air hose fitting.

NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart

on pg. 18 for nose assembly recommendations).

WARNING:

Do not operate in an explosive atmosphere.

The GB714 can be operated between 0ºF — 118ºF (-17.8ºC / 47.8ºC)

GB714 INSTALLATION TOOL

S/N: 1001 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Hand Held Weight

- 6.50 lbs. (2.9 kg)

Air pressure req'd

- 90-100 p.s.i. (6.2-6.9 bar)

Air consumption

- .30 SCF/cycle (8.50 L/cycle)

Hydraulic oil

- Automatic Transmission Oil

Setting stroke

- .590" (15 mm)

Rated pull load

- 6,400 lbs. (28.4 kN)

Noise level

- 81.5 dB(A)

Vibration

- Tested– No hazards found.

Dexron III, or equivalent.

REV. 3/21