Gage Bilt GB784 설치 지침 - 페이지 11

{카테고리_이름} Gage Bilt GB784에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Gage Bilt GB784 13 페이지.

페이지 인쇄

NOSE ASSEMBLIES:

Nose assemblies are not furnished with the tool and must be purchased separately. In ordering heads

be sure to specify the shank diameter and head style (universal or countersunk) of the rivets to be in-

stalled.

The following pulling heads will fit directly on the GB784 Riveter. (NOTE: Cherry

heads fit directly on the GB784).

.600

A Ø

.780 Ø

1. Remove knurled cap from front of riveter head.

2. Place jaw assembly (C) inside collet (B).

3. Insert spring end of jaw assembly into hole of head piston. Apply enough pressure to engage

collet threads. Turn until collet bottoms on shoulder of piston and collet lock snaps into slot in

piston. Hand tight is sufficient.

NOTE: To remove collet, push collet lock back into collet (using a blunt pointed tool) turning the

collet clockwise.

4. Place sleeve assembly (A) over collet and head piston. Slip knurled cap over the sleeve

assembly and hand tighten onto end of riveter head.

681 PULLING HEADS

FOR 2000 SERIES CHERRYLOCK RIVETS

CONFORMING TO NAS 1400 & NAS 1740

2.570

INSTALLING 681 PULLING HEAD ON RIVETER

RIVET

NOSE

DIAMETER ASSEMBLY

3/32"

3U-681-25

3/32"

3C-681-25

1/8"

4U-681-25

1/8"

4C-681-25

5/32"

5U-681-25

5/32"

5C-681-25

3/16"

6U-681-25

3/16"

6C-681-25

1/4"

8U-681-25

1/4"

8C-681-25

681 series pulling

DIMENSION

.188

.348

.163

.332

.250

.341

.208

.377

.313

.377

.269

.352

.375

.418

.335

.386

.500

.452

.458

.398

Rev. 12/12