5th Wheel 5LCHM02 사용자 설명서 - 페이지 11

{카테고리_이름} 5th Wheel 5LCHM02에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 5th Wheel 5LCHM02 18 페이지.

페이지 인쇄

LED Display

Headlight

Speed Unit

Gear 2

Gear 1

Total Mileage

Battery Indicator

M1 M2

Alert Cruise

Wireless

Control

Connection

Real-Time Speed

The pedestrian mode

Power Switch

Short press the Power switch for 1 second to turn on the scooter, and long press the Power switch for 3 seconds to turn it oﬀ.

Gear Setting

Press the power button twice quickly to switch the gear. The gear can be set to Level 1 (max. 6 km/h， The

pedestrian mode), Level 2 (max. 16 km/h), and Level 3 (max. 25 km/h).

Speed control

When riding the scooter at a speed faster than 3km/h (1.86 mph), the throttle will get started and take eﬀect. By

pressing the throttle, the user can control the riding speed. (Speed Range: 1-25km/h / 0.62-15.53 mph)

Brake control

Hold the left brake lever to brake. The greater the holding force, the greater the braking force. The indicator will

blinkinng under the condition of braking.

LED Headlight Switch

After switching on the scooter, click the LED headlight switch to turn it on.

Emergency Braking

When encountering an emergency, step on the rear brake with your foot. At this time, the rear wheel friction brake and

the front wheel electromagnetic brake can work at the same time. Under normal circumstances, do not use emergency

braking vigorously during high-speed driving, so as to avoid the riding risk or damage to the rear wheel. The company is

not responsible for the damage.

Tyre pressure

Before riding, please make sure the tyre pressure is no less than 2.8KPA. Otherwise, the mileage will decrease

Gear 3

each time. The tyre pressure may also be under the standard value, if the scooter is unused for a long time.

(This is applicable for the scooters equipped with pneumatic tires.）

Cruise control

The scooter is not initially conﬁgured with the cruise control speed. If necessary, open the mini program and

select the cruise control speed. When the scooter is running at the constant cruise control speed, the cruise

control will be enabled. After the cruise control is enabled, you can release the thumb accelerator, and the

scooter will automatically run forwards at a constant speed. Hold the left brake lever to disable the cruise

control. When the speed of the scooter reaches the set cruise control speed, the cruise control will be enabled

again.

You can set the status of no cruise in the mini program to disable the cruise control function.

Noise emission

The A-weighted emission sound pressure level of the vehicle in operation is less than 70 dB(A).