Gage Bilt GB206-500 사용 설명서 - 페이지 4

{카테고리_이름} Gage Bilt GB206-500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gage Bilt GB206-500 20 페이지.

WARNING:

Any other use is forbidden.

The GB206-500 and GB206-500A are hydraulic installation tools designed specifically for the efficient installation of blind, lockbolt

and Magna-Grip® fasteners thru 3/16" diameter. They weigh just over 3 lbs. (1.36kg) and can be operated in any position. They have

a .500" (12.7mm) fastener setting stroke and a rated pull load of 5,825 lbs. (25.9 kN).

The GB206-500 (electric actuated) installation tool operates on hydraulic pressure developed by the GB947 Powerunit set at 5,700 psi. (393.0 bar)

maximum PULL pressure and 2,400 psi (165.5 bar) maximum RETURN pressure. The tool comes equipped with a 12 foot (3.7 m)

hydraulic hose with quick disconnects and a electric control cord assembly .

The GB206-500A (air actuated) installation tool operates on hydraulic pressure developed by the GB910 & GB912 Powerunits set at

5,700 (393.0 bar) psi maximum PULL pressure and 2,400 psi (165.5 bar) maximum RETURN pressure. The tool comes equipped with a

12 foot (3.7 m) hydraulic hose with quick disconnects and a air line assembly.

NOSE ASSEMBLIES ARE NOT FURNISHED WITH THE INSTALLATION TOOL AND MUST BE ORDERED SEPARATELY. (See nose

assembly selection chart on pg. 15).

WARNING:

Do not operate in an explosive atmosphere.

The GB206-500 & GB206-500A can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)

GB206-500/ GB206-500A INSTALLATION TOOL

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Weight

Hyd. Pressure Req'd.

Hyd. Power Source

Hydraulic Oil

Setting Stroke

Rated Pull Load

- 3 lbs. (1.36 kg)

- 5,700 psi (393.0 bar) MAX PULL

2,400 psi (165.5 bar) MAX RETURN

- GB910, GB912 or GB947

Powerunit or equivalent.

- Fire resistant hydraulic oil conforming

with OSHA regulation 1926.302.

- .500" (12.7mm)

- 5,825 lbs. (25.9 kN)

8/16 REV 4/23