Gage Bilt GB510BOM 원본 사용 설명서 - 페이지 4

{카테고리_이름} Gage Bilt GB510BOM에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gage Bilt GB510BOM 20 페이지. Installation tool

WARNING:

Any other use is forbidden.

The GB510BOM and the GB510ABOM are hydraulic installation tools designed specifically for the efficient installation of 5/16" (7.94 mm)

BOM® fasteners. They weigh just over 4 lbs. (1.81 kg) and can be operated in any position. They have a .750" (19.1 mm) fastener setting

stroke and a rated pull load of 7,800 lbs. (34.7 kN).

The GB510BOM (electric actuated) installation tool operates on hydraulic pressure developed by the GB940 Powerunit set at 5,400 psi.

(372.3 bar) - 5,600 psi. (386.1 bar) maximum PULL pressure and 2,200 (151.7 bar) - 2,400 psi (165.5 bar) maximum RETURN pressure.

The tool comes equipped with 12' (3.7 m) of hydraulic hoses with quick disconnects and a electric control cord assembly .

The GB510ABOM (air actuated) installation tool operates on hydraulic pressure developed by the GB910 & GB912 Powerunits set at

5,400 psi. (372.3 bar) - 5,600 psi (386.1 bar) maximum PULL pressure and 2,200 (151.7 bar) - 2,400 psi (165.5 bar) maximum RETURN

pressure. The tool comes equipped with 12' (3.7 m) of hydraulic hoses with quick disconnects and an air line assembly.

WARNING:

Do not operate in an explosive atmosphere.

The GB510BOM & GB510ABOM can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)

GB510BOM/GB510ABOM INSTALLATION TOOL: S/N 1001 AND ABOVE

CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Weight

Hyd. Pressure Req'd.

Hyd. Power Source

Hydraulic Oil

Setting Stroke

Rated Pull Load

- 4 lbs. (1.81kg)

- 5,400 - 5,600 psi (372.3 bar - 386.1 bar) MAX. PULL

2,200 - 2,400 psi (151.7 bar - 165.5 bar) MAX. RETURN

- GB940, GB910 or GB912

Powerunit or equivalent.

- Fire resistant hydraulic oil conforming

with OSHA regulation 1926.302.

- .750" (19.1 mm)

- 7,800 lbs. (34.7 kN)

11/20 REV 121/22