greasetek GT-MINI-1 빠른 시작 매뉴얼
{카테고리_이름} greasetek GT-MINI-1에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. greasetek GT-MINI-1 2 페이지.
페이지 인쇄GREASE GUN - MINI
SAFETY INFORMATION
WARNING
RISK OF PERSONAL INJURY
WHAT COULD HAPPEN
Certain materials that can be used with this
tool may cause skin irritation if it comes in
direct contact with skin.
An unattended tool could be activated by
unauthorized/untrained persons, leading to
their injury or injury to others.
Loss of control of the tool can lead to operator
injury or injury to others in the work area.
Excess grease can make floors, work surfaces
and tools slippery and dangerous.
ITEM #910105
MODEL # GT-MINI-1
1
HOW TO PREVENT IT
Always read the label or Materials Safety Data
Sheets (MSDS) for the grease before use to
determine if it poses a risk of skin irritation.
Always wear gloves when assembling, loading
or operating this tool.
If skin comes into direct contact with grease,
thoroughly wash the areas of contact. Repeat
if necessary to thoroughly remove any grease
from skin. If skin becomes or remains irritated,
contact your local doctor or emergency room
for immediate help.
Store tool in a secure location away from reach
of children and untrained users.
Never operate tools while using drugs or
alcohol.
Do not overreach or stretch to operate the tool.
Keep proper footing at all times when handling
tools. Slipping, tripping and/or falling are major
causes of serious injury and or death.
Keep tools dry, clean and free from oil/grease.
Do not allow excess grease to accumulate on
floors, work surfaces, tools or equipment.
Stay alert. Watch what you are doing.
Use common sense. Do not operate tools when
you are tired.
Operators must be able to easily handle the
entire weight of the tool in operation, to maintain
full control of the tool 100% of the time.
Maintain awareness of work area safety at all
times. Always be aware of other people around
the work area to ensure safety.
Keep work area clean, free of clutter and well lit.
Do not allow children to operate any tool, and
keep children away from work areas.
3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or maintain
this product.
Improper operation or maintenance of this tool could result in serious injury and property damage.
Read and understand all warnings and operation instructions before using this tool. When using
any tool, basic safety precautions should always be followed to reduce the risk of personal injury.
Use each tool for its intended function only. Do not use this product in unsafe work conditions. It is
always recommended to keep a fire extinguisher and first aid kit near work areas.
FAILURE TO OBSERVE AND FOLLOW SAFETY INSTRUCTIONS COULD RESULT IN INJURY
OR DEATH.
WARNING: This product may contain a chemical known to the state of California to cause cancer,
or birth defects or other reproductive harm.
WARNING
RISK OF PERSONAL INJURY
WHAT COULD HAPPEN
Eyes and face can come into direct contact
with grease, causing serious injury.
Pumping improper materials or materials not
intended for gun application could result in
serious injury or death.
SAFETY INFORMATION
WARNING
INHALATION HAZARD
WHAT COULD HAPPEN
Some materials that may be used with tool
may give off vapors which could cause serious
injury with prolonged exposure.
WARNING
RISK OF FIRE OR EXPLOSION
WHAT COULD HAPPEN
Grease is a flammable substance and can
cause accelerated burning.
WARNING
WARNING
HOW TO PREVENT IT
Do not allow grease to come in to direct
contact with eyes. Do not ingest grease.
Never aim or pump grease at yourself or
anyone else.
Always wear ANSI approved Z87.1 safety
glasses with side shields, appropriate face
mask, gloves and protective clothing.
Always operate in a well ventilated area to
prevent health and fire hazards.
If eyes or face come into direct contact with
grease, contact your local doctor or emergency
room for immediate help.
Do not pump anything but grease with this tool.
Always read the label or Materials Safety Data
Sheets (MSDS) for the materials before use to
ensure they are safe to use.
2
HOW TO PREVENT IT
Always work in a clean, dry, well-ventilated
area. Be aware of chemicals in the work area
and read all Materials Safety Data Sheets
(MSDS) for the materials and/or chemicals
that may be present.
HOW TO PREVENT IT
Work in a clean, well ventilated area free of
combustible materials.
Wiping or cleaning rags and other flammable
waste materials that may have been used on
the tool must be placed in a tightly closed
metal container, and disposed of in a proper
manner.
4