Gage Bilt GB585 원본 사용 설명서 - 페이지 18

{카테고리_이름} Gage Bilt GB585에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gage Bilt GB585 20 페이지. Installation tool
Gage Bilt GB585에 대해서도 마찬가지입니다: 설치 (11 페이지)

페이지 인쇄

The GB912 Hydraulic Powerunit is a portable power source designed to operate a wide range of hydraulic installation tools. The unit air powered,

air actuated and delivers up to 10,000 psi (689.5 bar) working pressure. The actuator on the installation tool remotely controls the hydraulic

oil directional flow. The unit consists of a two position air hydraulic pump, four way control valve and relief valve mounted on the reservoir.

The rapid tool piston movement is obtained through a higher (12 cubic inches a minute) output pump. Quick disconnect hydraulic couplings

and air control socket are included to attach the equipment hydraulic hoses and air control tube.

The GB912 Hydraulic Powerunit is available separately or in kits including hydraulic quick-disconnect couplers, air connectors, air lines and

hydraulic hoses in various lengths.

GB585 / GB585A INTALLATION TOOL

Powerunits Available

GB912 POWERUNIT

Images may not reflect actual tools

GB912-12 includes the GB912 Powerunit and 12 ft. (3.7 m) Hose Kit-Air, part #910701.

GB912-26 includes the GB912 Powerunit and 26 ft. (7.9 m) Hose Kit-Air, part #910705.

GB912-38 includes the GB912 Powerunit and 38 ft. (11.6 m) Hose Kit-Air, part #910709.

GB912-52 includes the GB912 Powerunit and 52 ft. (15.8 m) Hose Kit-Air, part #910714

(Sold Separately)

REV. 12/17