Hi Sharp ATR320H 빠른 매뉴얼 - 페이지 7

{카테고리_이름} Hi Sharp ATR320H에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi Sharp ATR320H 11 페이지. 16 / 32 ch analogue hd- hybrid dvr

4.Wizard setup

After the device starts, a setup wizard pops up. You can set up time，network and disk management.

Click device name box to popup a keyboard as follow:

It supports digits, alphabets and symbols as inputs. Click Shift button to input Capital letters and symbols; click

Shift button again to return.

The default HTTP port is 80. The default server port is 6036. You can check "Obtain an IP address

automatically‟ to acquire network information or input IP address, subnet mask, gateway, preferred/alternate

DNS server manually. This function is used to monitor DVR through internet

Click Next button. This will take you to the HDD management window.

Record stream

Step1: enter into system configuration record configuration record bit rate

When DVR receives the signals from camera, it will distinguish the signals (1080P/720P/WD1(960H)) and set

the resolution automatically.