Hi Sharp ATR620H 빠른 매뉴얼 - 페이지 8

{카테고리_이름} Hi Sharp ATR620H에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi Sharp ATR620H 11 페이지. 16 / 32 ch analogue hd- hybrid dvr

페이지 인쇄

Step2: Set up rate, resolution, quality, encode and max bit stream.

Step3.: Select "All" to set the same settings for all channels.

Click "Apply" button to save the setting.

Note: if the rate value set is over high the maximum resources of the device, the value will be

adjusted automatically.

You can setup record frame rate and quality for each channel and change record resolution.

Adjustable parameter as following,

Resolution

720P

TVI

1080P

720P

AHD

1080P

WD1

960H

(960H)

720P

1080P

DD Wizard

You can check your HDD information through this tab. If your HDD was recently installed, select the HDD from

the list to format it.

Click on Exit to leave the wizard

You can check your HDD information through this tab. If your HDD was recently installed, select the HDD from

the list to format it. Click on Exit to leave the wizard

5.Login

You can login or log off the DVR system. Once logged off you cannot do any other operation except changing

the multi-screen display.

After you exit the wizard setup, you can login to the DVR.

Notice: The default user name and password is "admin" and 123456"

Frame Rate

1~25fps(PAL)/1~30fps(NTSC)

1-15（NTSC）/1-12(PAL)

1~25fps(PAL)/1~30fps(NTSC)

1-15（NTSC）/1-12(PAL)

1~25fps(PAL)/1~30fps(NTSC)

Quality

The higher the

value is, the

clearer the

recorded image is.

Six options:

lowest, lower, low,

medium, higher

and highest.

Encode

Max bitrate

You shall adjust it

VBR and

subject to the actual

CBR.

network condition.

1536, 1792, 2048,

4096, 5120, 6144,

7168, 8192, 9216,

10240, 12288 kbps