Gage Bilt GB740 설치 매뉴얼 - 페이지 4

{카테고리_이름} Gage Bilt GB740에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gage Bilt GB740 12 페이지.
Gage Bilt GB740에 대해서도 마찬가지입니다: 원본 사용 설명서 (20 페이지)

PRINCIPLE OF OPERATION

When the trigger is depressed, the pressurized air inside of the tool is released allowing spring pressure to

move the valve spool causing the air to be redirected. The air is directed to the top of the air piston, moving it

in a downward direction. The air below the air piston is then directed through the valve sleeve and exhausted

out of the bottom of the tool. Simultaneously, the piston rod connected to the air piston is also moving down,

forcing hydraulic oil up and into the front side of the cylinder head, causing the piston to move to the rear of

the cylinder head. The internal components of the attached nose assembly are also moving with the piston to

start the fastener installation.

When the fastener installation is completed, the trigger is released. Air

pressure is then built up inside of the handle causing the valve spool to return to its original position and

reversing the sequence directing air pressure to the rear of the cylinder head, causing the piston to move to

the forward position.

CYLINDER

HEAD

AIR

PISTON

PRESSURE

OIL

PRESSURE

AIR

PRESSURE

PISTON

ROD

AIR

PISTON

AIR

PRESSURE

VALVE

SPOOL

AIR

PISTON

AIR

PRESSURE

AIR

PRESSURE

EXHAUST

Image may not reflect actual tool

Rev. 3/13