Dawn 1500 조립 및 작동 매뉴얼 - 페이지 7

{카테고리_이름} Dawn 1500에 대한 조립 및 작동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dawn 1500 8 페이지.

1500 MOUNT ASSEMBLY INSTALLATION

NOTE Your Dawn 1500 add-on coulter attachment MUST match

your Dawn Trashwheel mount. For example, Trashwheel mount

1140-2sp3.25 MUST be mated with a 1500-3.25, etc.

Remove Trashwheels from mount by turning screw-adjust cap

in counter-clockwise direction.

CAUTION - To prevent accidents, make sure to support

the Trashwheel assembly so it does not fall when being

removed.

Remove the two bottom bolts of Trashwheel mount plate.

At this time you can also loosen the upper bolts of the

Trashwheel mount plate as well. You do NOT want to

completely remove the upper bolts!

INSTALLATION

Slide your 1500 coulter bracket onto your Trashwheel

mount bolts and secure by inserting lower faceplate bolts.

Tighten all 4 bolts at this time.

Align and install Trashwheels.

NOTE For all coulter/Trashwheel

combinations (1500 and 1572)

using TWO Trashwheels, wheels

MUST be set in the rear stem

holes with formed strippers

pointing backwards.

Attach coulter by inserting 5/8"-11x1.75" HHCS through

washer, 1500 arm, and into coulter hub.

9270 9032

www.dawnequipment.com

Toll Free: 800.554.0007

Fax:815.899.3663