Dawnco STARLOOK- D 매뉴얼 - 페이지 6

{카테고리_이름} Dawnco STARLOOK- D에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dawnco STARLOOK- D 16 페이지.

Other functions in the Picture-mode:

1. Invert

2. Sound

3. Memory

4. Atten:

0. 13/18V

#. 22kHz

DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • [email protected]

Switch between normal video (KU-band) and inverterad

Video (C-band). Selected position is displayed in the LCD-display.

For listening to analog audio. Audio volume and frequency

(5.5 – 8.5 MHz) are adjusted with the two small knobs just under the

main-knob.

For storing the different analog and digital channels (frequencies).

Tune in the "right" frequency before entering this function

(ex. 1720 MHz).

Enter the Memory function (button nr 3) and push Save (button nr 1).

The instrumentet asks: -"SAVE. ARE YOU SURE ?"

Check that the Memoryposition is the right one (displayed at the right

bottom on the LCD-display). If not, chose a new one with the

knob (0-99). Free positions are named: Pos free

After selecting a position, push button nr 1 (YES).

Notice that even the preselected 13V/18V, 22 kHz on/off will be

memorized.

Text-editor:

When the channel (frequency) is saved, the Text-editor appears on the

monitor which makes it possible to enter a name for that memory-

position (ex. CNN).

Use the knob to select the first letter (ex. C) and save it with the control-

button. Move to the next letter (ex. N) and so on.

If a mistake is made and wrong letter is saved, simply correct by

pushing button nr 1 (Delete) and the cursor will jump one position

backward.

Attenuation. Manuell attenuation 15dB on/off.

Selected position is displayed in the LCD-display.

Selection of 13V alt. 18V. Chosed position is displayed at the top of the

LCD-display.

22 kHz on/off. Chosed position is displayed at the top of the LCD-

display.

(5).