Active Silicon AS-CIB-3GSDI-002-EVAL-B 빠른 시작 매뉴얼 - 페이지 8
{카테고리_이름} Active Silicon AS-CIB-3GSDI-002-EVAL-B에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Active Silicon AS-CIB-3GSDI-002-EVAL-B 10 페이지. Evaluation kit for harrier af-zoom sdi cameras
Active Silicon AS-CIB-3GSDI-002-EVAL-B에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)
페이지 인쇄
Argument [P3]:
This is the VISCA command that is to be sent to the camera.
The application requires VISCA commands to be entered in a comma delimited format; the commas
are removed before sending the commands.
Each individual number is treated as a hexadecimal number.
To work in PowerShell the comma separated VISCA command should be enclosed in double
quotation marks: " *command* "
For information on suitable VISCA commands please refer to the documentation for your camera.
Argument [P4]:
This is an optional parameter. If you set [P4] to /P HarrierControl will attempt to parse the
command and response and print a description of the command/response on the screen.
Note: not all commands are supported and there may be no description for some commands.
Examples:
C:> HarrierControl TTL 9600 81,09,00,02,ff /P
Tx: [ 81 09 00 02 ff ]
Get Camera Details
Rx: [ 90 50 00 20 04 66 01 00 03 ff ]
Active Silicon AS-CAM-10SGHD-A
Camera Firmware Version 0x0104
---
C:> HarrierControl TTL 9600 "81,09,04,24,9A,FF"
Tx: [ 81 09 04 24 9a ff ]
Rx: [ 90 50 00 00 ff ]
---
C:> HarrierControl TTL 9600 81,09,00,02,ff /P
Tx: [ 81 09 00 02 ff ]
Get Camera Details
Rx: [ 90 50 00 20 04 66 01 00 03 ff ]
Active Silicon AS-CAM-36SGHD-A
Camera Firmware Version 0x0102
March 2022
QUICK START GUIDE
HARRIER AF-ZOOM SDI CAMERAS
Version 1.0.1 - March 2022
Page 8 of 10