Dyna-Glo BF30DTDG-2 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Dyna-Glo BF30DTDG-2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dyna-Glo BF30DTDG-2 10 페이지. Vent-free blue flame gas wall heater

OPERATION

BURNER FLAME PATTERN

Fig. 28 shows a correct burner flame pattern. Fig. 29 shows an incorrect burner flame pattern with

lifting, and excessive flame height.

If burner flame is incorrect:

• turn heater off (see "To Turn Off Gas to Appliance", page 19).

• see Troubleshooting, pages 23 through 26.

Fig. 28 - Correct/Normal Flame Pattern

with short flames with Control Knob Set

to High Flame (5)

The upper third of flame

may be bright yellow when

operated on propane.

NOTE: Ambient flame burners produce both a blue and yellow flame. An excessively high yellow

colored flame may be caused by airborne dust, dander, pet hair, etc. Additionally, an excess

amount of Mercaptane in the fuel can result in an orange or yellow colored flame.

When this heater is set for use on propane gas, the upper one third of the flame may be bright yellow.

When this heater is set for use on natural gas, a slight yellow tipping of the flame may occur.

Fig. 29 - Incorrect/Abnormal Flame Pat-

tern with tall flames with Control Knob

Set to High Flame (5)

1/2 Glass

Height

1/2 Glass

Height