Active Silicon AS-CIB-IP-001-A 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Active Silicon AS-CIB-IP-001-A에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Active Silicon AS-CIB-IP-001-A 13 페이지. Harrier ip camera interface board
Active Silicon AS-CIB-IP-001-A에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (7 페이지)
페이지 인쇄Discovering the IP Address of the Camera
Finding out the camera's IP address requires the
By default, the camera is automatically assigned an IP address using DHCP.
To discover the IP address:
•
Ensure the camera has powered-up correctly and is connected to the network.
•
Ensure your network service/Ethernet router is running a DHCP server.
•
Launch the
ONVIF Device
•
Click the Refresh button. The camera will appear on the Device List showing the IP address.
Alternatively, you can connect the camera to the network, then check the DHCP service and list the
allocated IP addresses for the attached devices; the Harrier IP will appear as imx8mmharrier.
Accessing the Harrier IP Website
The Harrier IP Camera Interface Board serves a website that can be used to access system information and
control various settings. There are several pages on the site; these show the camera status and allow
various settings to be changed (e.g. IP address, camera mode, etc.). The camera log file can be retrieved
on the Maintenance web page.
To access the Harrier IP Website, enter: http://<IP Address> into your web browser.
Figure 10. Harrier IP Overview/Dashboard web page
March 2023
HARRIER IP CAMERA INTERFACE BOARD
ONVIF Device
Manager.
QUICK START GUIDE
Version 1.04 – March 2023
Manager.
Page 5 of 12