Active Silicon HARRIER H.264 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Active Silicon HARRIER H.264에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Active Silicon HARRIER H.264 6 페이지. Ip camera interface board

Figure 8. Harrier IP webpages for camera control

For advanced users, the second tab allows the camera model (e.g. Tamron MP1110) and its video mode

(e.g. 1080p60) to be set. Changing the camera video mode may require the camera to be re-booted; this

can take up to 1 minute.

Downloads

ONVIF Device Manager:

VLC:

https://www.videolan.org/vlc/index.en-GB.html

GStreamer:

https://gstreamer.freedesktop.org/download/

Getting Started with the ONVIF API

The Harrier IP implements the ONVIF Profile S standard (www.onvif.org). The main services and their

functions are listed below.

•

Media service: allows control of the H.264 encoder settings and the on-screen display (OSD)

features.

•

Device IO service: provides direct communication to the camera serial interface. This enables the

application to communicate with the camera using the VISCA protocol, thus providing full control of

the camera.

•

Imaging service: enables the application to control some of the camera settings (e.g. brightness,

etc.). Only a subset of the camera settings can be controlled this way, but this service enables

ONVIF-compliant third-party software to control some of the camera settings.

•

Device Management service: provides control of the Harrier IP platform (e.g. time and date, etc.).

Useful links:

http://www.onvif.org/wp-content/uploads/2016/12/ONVIF_WG-APG-Application_Programmers_Guide-1.pdf

https://www.youtube.com/watch?v=mk6vAyIZZ0A&list=PLc2UaWzFQrPN7XNq2mAkVdsMkRCI0BMML&in

dex=3

November 2021

HARRIER H.264 IP CAMERA INTERFACE BOARD

https://sourceforge.net/projects/onvifdm/

QUICK START GUIDE

Version 1.0 – November 2021

Page 5 of 6