Dawson Tools DDM450 매뉴얼 - 페이지 3
{카테고리_이름} Dawson Tools DDM450에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dawson Tools DDM450 9 페이지.
페이지 인쇄SAFETY SYMBOLS
3.
Important safety information
AC(alternating current)
DC(direct current)
DC/AC Voltage or Current
FEATURE DETAILS
4.
1
2
DDM450
3
6
8
Ground
Double insulation protection
Fuse
Compliance with EU regulations
4
5
7
4
9
3
1.LCD Display
2.Hold
Press "HOLD" to hold the current reading on the display. Press the button
again to return to normal measurement
3.Function Button
Press "FUNC" to switch between functions or between AC/DC current.
4.
Backlight Button
Press "
" to turn on the
backlight. Press the button again to turn off the backlight.
5.
NCV Button
Hold the "NCV" button down in any mode and the meter will activate the
non-contact voltage detection. Move the top of the meter towards an AC
voltage source and the buzzer will sound and the NCV indicator will light
up if voltage is detected. Release the "NCV" button to stop NCV detection.
6.Rotary Switch
7.Input Jack (all measurements; current below 600mA)
8.A Jack (current measurements between 600mA-10A only)
9.Common Jack (all measurements)
.
4