Dyna-Glo EG4800DG 설치 및 유지 관리 지침 매뉴얼 - 페이지 4

{카테고리_이름} Dyna-Glo EG4800DG에 대한 설치 및 유지 관리 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dyna-Glo EG4800DG 19 페이지. Portable unit heater

Any other servicing should be performed by qualiﬁed service personnel.

WALL OR CEILING MOUNTING

THE EG4000DG OR EG4800DG OR EG5300DG IS SUPPLIED WITH A WALL OR CEILING MOUNTING

BRACKET, MODEL EG4000DG OR EG4800DG OR EG5300DG, THE BRACKET SHOULD BE MOUNTED TO

A STRUCTURE THAT IS CAPABLE OF SUPPORTING THE BRACKET AND HEATER COMBINED WEIGHT.

IDEALLY THE BRACKET SHOULD BE BOLTED TO A WALL STUD, ROOF TRUSS OR TO A BLOCK WALL

USING THE PROPER MOUNTING HARDWARE. THE HEATER SHOULD BE MOUNTED AS CLOSE TO THE

RECEPTACLE AS POSSIBLE TO ELIMINATE THE USE OF AN EXTENSION CORD.

Drill two holes in a wall/ceiling, the distance of the holes should match the bracket. Screw two M10*30 screws

(not included in samples) to wall/ceiling, male sure the bracket is secured, hung the heater as below photo, let

the hand-driven (provide with sample) go through installation opening. Secure the screw by a nut.

Mount with bottom of heater at least 2.4 m above floor or grade.

CAUTION: MOUNT WITH BOTTOM OF HEATER AT LEAST 2.4 m ABOVE FLOOR OR

GRADE

ATTENTION : INSTALLER À AU MOINS 2,4 m DU PLANCHER.

CAUTION