Great day LNPHH650 지침 - 페이지 2

{카테고리_이름} Great day LNPHH650에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Great day LNPHH650 2 페이지. Lawn mower hi-hitch

STEP 1-

ATTACH BRACE ARMS TO HI-HITCH BODY USING 1/4" X 2 1/2" BOLT, FLAT WASHERS

AND LOCK NUT. TIGHTEN UNTIL SLIGHTLY SNUG. BRACE ARMS SHOULD BE ABLE TO

PIVOT.

STEP 2-

CONNECT HI-HITCH BODY TO LAWN MOWER TRAILER MOUNTING HOLE WITH 5/8" X 2

1/2" BOLT, FLAT WASHERS AND LOCK NUT. TIGHTEN ONLY UNTIL SNUG. HI-HITCH

SHOULD BE ABLE TO PIVOT SIDE TO SIDE.

STEP 3-

POSITION BRACE ARMS AGAINST BACK OF LAWN MOWER AND MARK FOR DRILLING.

SWING BRACE ARMS OUT OF THE WAY. DRILL MARKED HOLES WITH A 5/16" DRILL

BIT.

**NOTE** MAKE SURE THERE ARE NO OBSTRUCTIONS BEHIND BACK PLATE OF LAWN

MOWER BEFORE DRILLING.

STEP 4-SEE FIGURE 5

ALIGN HOLES IN BRACE ARMS WITH DRILLED HOLES IN LAWN MOWER AND FASTEN

WITH THE ¼" X 1" BOLTS, FLAT WASHERS AND LOCK NUTS. TIGHTEN SECURELY.

STEP 5-SEE FIGURE 6

TIGHTEN REMAINING HARDWARE SECURELY.

NEVER EXCEED THE TRAILER CAPACITY OF THE LAWN MOWER.

For more information about this or other products, contact us at:

Great Day, Inc.

604 Kimbrough Dr. * Tallulah, LA 71282 * (866) 649-1918 *