Active Silicon AS-CIB-IP-002-A 빠른 시작 매뉴얼 - 페이지 7
{카테고리_이름} Active Silicon AS-CIB-IP-002-A에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Active Silicon AS-CIB-IP-002-A 13 페이지. Harrier ip camera interface board
Active Silicon AS-CIB-IP-002-A에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (7 페이지)
Viewing Video Streams
To view streaming video from the Harrier IP Camera Interface Board you will need a media player such as
VLC media player or GStreamer. Streams can also be viewed in the ONVIF Device Manager. There are
three stream profiles available:
•
quality_h264
•
balanced_h264
•
bandwidth_h264
The profile to be displayed on the player is specified in the stream connection:
rtsp://<IP address>:8554/<profile>
Using VLC Media Player
•
Install and open
•
From the Media menu, select Open Network Stream
•
In the Open Media dialog, enter rtsp://<IP address>:8554/quality_h264
•
Click the Play button
Using GStreamer
•
Install
GStreamer
(https://gstreamer.freedesktop.org/download/)
•
Run the following command:
gst-launch-1.0 rtspsrc location=rtsp://<IP Address>:8554/quality_h264 latency=0
! decodebin ! autovideoconvert ! autovideosink sync=false
Note: to make GStreamer work on Windows, you may need to update the 'PATH' environment variable and
set the GStreamer environment variable; for example:
set GSTREAMER_1_0_ROOT_X86_64=c:\gstreamer\1.0\x86_64\
set path=%path%;%GSTREAMER_1_0_ROOT_X86_64%\bin;
Controlling the Camera
The ONVIF standard defines and supports control for various camera settings and client applications should
use the ONVIF Imaging service to control these camera settings (please consult the ONVIF documentation
for more information, see section 'Getting Started with the ONVIF API' below).
However, block cameras typically have many other settings/features that can be controlled using VISCA
commands sent over the camera serial interface (see figure 3). With the Harrier IP Camera Interface Board,
applications can use the ONVIF DeviceIO service to send and receive VISCA commands to the camera.
Note: applications should not use VISCA commands to change settings that are controlled by the ONVIF
Imaging service (e.g. camera resolution and frame rate).
March 2023
HARRIER IP CAMERA INTERFACE BOARD
VLC media player. (https://www.videolan.org/vlc/index.en.html)
and open a command prompt or shell.
QUICK START GUIDE
Version 1.04 – March 2023
Page 7 of 12