Hi-Force HEP Series 사용 설명서 - 페이지 6

{카테고리_이름} Hi-Force HEP Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Force HEP Series 8 페이지. Electric driven pump

페이지 인쇄
Hi-Force HEP Series 사용 설명서
Instructions for HEP2, HEP3 &HEP3 series two
stage electric Driven Pumps
Motor size and supply options:
HEP2 Series: Motor 1.5kW
Supply: 110/115v single phase 50Hz or 60Hz
220/240v single phase 50Hz or 60 Hz
380/440v three phase 50/60Hz
HEP3 & HEP5 Series: Motor 2.2kW
Supply: 110/115v single phase 50Hz or 60Hz
220/240v single phase 50Hz or 60 Hz
380/440v three phase 50/60Hz
Common models and typical uses are
given below:-
Model No:
HEP207111
HEP310121
HEP517122
HEP207112
HEP310122
HEP517142
HEP207114
HEP310124
HEP517144
HEP207121
HEP310141
HEP517162
HEP207122
HEP310142
HEP517164
HEP207124
HEP310144
HEP207211
HEP310221
HEP207212
HEP310222
HEP517242
HEP207214
HEP310224
HEP517244
HEP207221
HEP310241
HEP517262
HEP207222
HEP310242
HEP517264
HEP207224
HEP310244
HEP207311
HEP310321
HEP207312
HEP310322
HEP517342
HEP207314
HEP310324
HEP517344
HEP207321
HEP310341
HEP517362
HEP207322
HEP310342
HEP517364
HEP207324
HEP310344
HEP207411
HEP310421
HEP207412
HEP310422
HEP517442
HEP207414
HEP310424
HEP517444
HEP207421
HEP310441
HEP517462
HEP207422
HEP310442
HEP517464
HEP207424
HEP310444
Note: Models with a suffix 'S' (e.g.
HEP207414S) have a 3 or 4 way solenoid
operated valve with a remote control
pendant.
Note: Models with a suffix 'S-AR' (e.g.
HEP310322S-AR) have a 3 way solenoid
operated valve with an auto retract
function.

IDENTIFICATION OF COMPONENTS

Refer to figure 1 and 2.
Hi-Force Limited – Prospect Way – Daventry – Northants NN11 8PL – United Kingdom
Tel: +44(0) 1327 301000: Fax: +44(0) 1327 706555: Website: www.hi-force.com
INSTRUCTION MANUAL – Electric Driven Pump Series HEP:
Model Series: HEP1, HEP103, HEP2, HEP3, HEP5
Hydraulic Connection
No control valve, Pump (P)
and Tank (T) connections for
single and double acting
cylinders, controlled by
remote mounted valves.
2 way valve for operating
single acting cylinders and
tools requiring advance and
retract, but no "hold"
function. E.g. Crimpers and
cutters
3 way valve for operating
single acting cylinders
requiring advance, retract
and central load hold
position. E.g. Simple lifting
operations
4 way valve for operating double
acting cylinders, requiring
advance, retract and central load
hold position.E.g. lifting and
positioning where more control
is required.
1. Hydraulic oil drain plug.
2. Hydraulic directional control valve – if
fitted (type will vary)
3. Roll frame (optional).
4. Motor.
5. Oil filler breather cap.
6. Tank.
7. Hydraulic oil level gauge.
8. On/off switches
9. Electrical control box.
10. Adjustable pressure relief valve.
11. Hydraulic service connections,(one or
two ports, depending on valve type)
12. Remote control pendant (fitted to
models with solenoid valves only).