Hi-Force HEP310142 사용 설명서 - 페이지 4

{카테고리_이름} Hi-Force HEP310142에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Force HEP310142 20 페이지. Electric driven pumps, general duty, medium/high flow



NEVER attempt to disconnect a hose from a hydraulic system until the systems pressure has been

completely released. Doing so can result in that pressure becoming trapped within the system and

relieving trapped pressure can be dangerous.



NEVER try to relieve trapped hydraulic pressure in the system by loosening or attempting to remove

the coupler. Trapped hydraulic pressure can cause a loosened coupler to dislodge unexpectedly

with great force. This action could result in serious personal injury or death, as the coupler could

become a projectile and hit operatives in the working area.



Loosening a coupler under pressure can result in the escape of hydraulic oil at high pressure, which

can penetrate the skin and cause significant injury or death.



NEVER use a hammer and punch to unseat a coupler check valve that is under pressure. Doing so

could result in the sudden, uncontrolled release of hydraulic oil at high pressure, which could cause

significant injury or death.



Immediately replace any worn or damaged parts using genuine Hi-Force parts only.



DO NOT remove any labels from the product. Replace any damaged or unreadable label

immediately.



NEVER lift or carry any hydraulic components by the hose or hoses connected to them.



Avoid damaging hydraulic hose. ALWAYS route hoses to ensure that they are free from sharp bends

and kinks. Using a bent or kinked hose will result in severe back-pressure, which can lead to hose

failure.



ALWAYS operate the system under no-load conditions before the actual operation, to ensure there

is no air trapped in the hydraulic circuit.



Servicing of hydraulic equipment must only be undertaken by a qualified technician.

Failure to observe and obey the following safety precautions could result

in property damage, equipment damage or minor/moderate personal

injury;



DO NOT

drop or place heavy objects on a hydraulic hose, as this may cause

internal damage, which could result in rupture of the pressurised hose. A

ruptured hose could cause significant damage to components and possible

severe injury to personal operating nearby.

Operating Instruction Manual:

OM-HEP2/3-01

From Serial Number:

BQ3323