Dynablast CRBG Series 소유자 매뉴얼 - 페이지 4
{카테고리_이름} Dynablast CRBG Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynablast CRBG Series 12 페이지.
페이지 인쇄
IMPORTANT SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
31. DO NOT use this machine to spray chemicals, acids,
solvents, insecticides or any flammable material.
These products can cause physical injuries to the
operator and irreversible damage to the unit.
32. DO NOT allow your pressure washer to freeze
during the colder months. Damage as a result of
freezing will void the warranty.
33. Prior to starting the pressure washer in cold
weather, be sure that ice has not formed in any part
of the equipment.
34. Never tie knots or kink the high-pressure hose as
damage could result. DO NOT operate the unit if
the high-pressure hose is damaged.
35. The gun safety Lock PREVENTS the trigger from
accidentally being engaged. This safety feature
DOES NOT lock the trigger in the ON position.
36. Securely connect the discharge lines before starting
the pump. An insecurely connected line may cause
personal injury and/or property damage.
37. To avoid serious injury and damage to the unit
DO NOT operate this pressure washer with any
components rated less than the pressure rated for
each model (i.e.: spray guns, hoses, hose couplings,
etc...)
38. DO NOT allow the pressure washer to run for more
than 3 minutes with the gun closed and engine
running. Prolonged operation in bypass mode can
result in damage to the pump.
39. Shut the engine OFF if you are not using the
pressure washer.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction
or break-down, grounding provides a path of least
resistance for the electric current to reduce the risk of
electric shock. This product is equipped with a cord that
includes a grounding plug. You must make sure that the
plug is inserted into an outlet that is properly installed
and grounded in accordance with all local codes and
ordinances.
4
(CONT'D)
*ELECTRIC MODELS ONLY*
(CONT'D)
CAUTION: The pressure has been preset by the
manufacturer. DO NOT attempt to adjust the pressure
higher than its factory setting. Doing so will damage the
pump, void the warranty and could result in personal
injury or damage.
CAUTION: This machine has been designed for use with
pressure washer detergents only.
WATER SUPPLY
(Cold Water Only)
This pressure washer must only be used with clean water;
use of unfiltered water or corrosive chemicals will damage
the pressure washer.
1.
The supply hose should be at least 5/8" in diameter.
2.
The water supply much be at least twice to the flow
rate of the pressure washer. (GPM)
3.
The water supply pressure must be a minimum of
20psi and must not exceed 120psi.
4.
The water supply temperature must not exceed
40˚C/104˚F.
5.
Never use the pressure washer to draw in water
contaminated with solvents, e.g. paint thinners,
gasoline, oil, etc.
6.
Always prevent debris from being drawn into the
unit by using a clean water source.
7.
Calcium build-up due to hard water is NOT covered
by the warranty.
Warning: Improper connection can result in a risk
of electrocution. Check with a licensed electrician if
you are unsure as to whether the outlet is properly
grounded.
DO NOT modify the plug provided with the unit; if it
will not fit the outlet, a have a proper outlet installed
by a licensed electrician. Do not use any type of
adapter with this product.