Hi-Force HPF207314 사용 설명서 - 페이지 12

{카테고리_이름} Hi-Force HPF207314에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Force HPF207314 16 페이지. Electric driven, general duty, medium flow

6.3 Pumps with Solenoid Valves

1. Set the adjustable pressure relief valve (5) if required. See section 6.1 for details.

2. Turn the motor on by pressing the green 'ON' button (1).

3. Press and hold the 'advance' button on the pendant to advance the cylinder. Release the button

once the cylinder has been advanced the desired amount. The cylinder will remain in the load

holding position when the button is released.

4. Press and hold the 'retract' button to retract the cylinder. Release the button once the cylinder has

been retracted.

NOTE: After operation of the press, it is good practice to return the cylinder piston

•

Inspect the pump for damage after each use.

•

Change the oil every 500 working hours using high quality ISO46 hydraulic oil.

•

Before storing ensure the cylinder piston has been fully retracted.

•

Have the pump serviced regularly by a Hi-Force authorised repair centre.

Operating Instruction Manual:

OM-HPF PUMP-01

From Serial Number:

BS8412