Great Gazebo CROWN 조립 지침
{카테고리_이름} Great Gazebo CROWN에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Gazebo CROWN 2 페이지.
crown gazebo
assembly instructions
Gazebo Setup
1) Unfold the smaller of the two Bottom Frames into a hexagon.
2) Arrange the larger Bottom Frame around the smaller frame with snaps facing outward.
3) Join the two Bottom Frames together by inserting the pipe attached to the larger
frame into the connector attached to the smaller frame at each of the six locations labeled
the diagram below.
4) Assemble the Top Frame as show in the digram to the right.
5) Attach the Top Frame to the Bottom Frame by lifting two of the ribs into the frame
sockets labeled
. Next, insert two ribs into the sockets labeled
ribs into the frame sockets labeled
6) Throw the Top Canopy over the assembled Top Frame and snap it to the ribs.
7) Snap the Gazebo Skirt onto the Bottom Frame, starting at one end.
8) Align counters with Velcro and press down firmly.
. Finally, lift the remaining two
.
bottom frame
Top Frame Setup
Slip top and bottom ribs together ( ),
then insert the ribs into the crown ( ).
Make sure the button comes through the
hole in the bottom rib and on the crown.
in
CONTACT
Please contact The Great Gazebo, Inc. with
any questions regarding the assembly or
care of your Crown Gazebo.
EMAIL »
PHONE »
top frame
800.962.2767 or 517.625.2011