Active Silicon AS-ADP-SDI-001-A 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Active Silicon AS-ADP-SDI-001-A에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Active Silicon AS-ADP-SDI-001-A 6 페이지. Harrier sdi adapter

LED Functionality

Figure 5: Video output side of housed Harrier SDI Adapter showing LEDs

If there is no video input LEDs 1 and 2 will be off most of the time but will flash green alternately.

If there is video input LED 1 (RJ-45) or LED 2 (BNC) will flash green (standard video) or yellow

(HD-VLC mode). Note: if you switch mode it will take a second or two for the LED to change color.

LED 4 will flash green when the 1080p60 test pattern output is enabled.

If any LEDs are red there is a fault condition.

For more details on LEDs and status, please see the Harrier SDI Adapter datasheet on the

Active Silicon website

The SuperSpeed USB VIDEO OUT (type-C) port can be used to acquire/stream/record image data in

parallel with the HDMI/SDI display output. The port provides a UVC (USB Video Class) compliant

stream, and video data may be viewed on any UVC compliant host application such as the Harrier

Example application (part of the Harrier USB Adapter SDK - see below).

Note: this will only work with a cable of minimum specification:

USB 3.X Type-A/C to Type-C, 5Gbps (or greater)

Please ensure that you are using a suitable cable, otherwise the USB video will not work.

Installing the Harrier USB SDK

The Harrier USB SDK provides an example UVC video application with full source code and

documentation for application software development. It is available for download in the downloads

tab here:

https://www.activesilicon.com/products/harrier-sdi-adapter

Currently the SDK is only supported on Windows 10.

Installation of additional drivers is not required.

HDMI

SDI OUT

OUT

(in the Harrier SDI Adapter - Downloads section).

USB VIDEO

(BNC)

OUT

QUICK START GUIDE

HARRIER SDI Adapter

Version 1.3 July 2019

LEDs

1 2

3 4

Page 3 of 6