Hi-Force HPP21036 사용 설명서 - 페이지 5

{카테고리_이름} Hi-Force HPP21036에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Force HPP21036 16 페이지. Petrol driven hydraulic pumps

2.4 Hydraulic Pump Specific Safety Precautions

•

NEVER invert the pump or lay it on its side, either in use, in transport or in storage.

•

DO NOT weld any items to the pump or modify it in any way from its delivered condition. Your

warranty may be invalidated, and it could lead to serious personal injury.

•

NEVER exceed the maximum rated capacity of any hydraulic cylinder/tool. Hi-Force manufactures

its hydraulic pumps to operate at a maximum working pressure of 700 BAR (10,000 PSI). DO NOT

connect a cylinder/tool with a lower pressure capacity rating to any Hi-Force pump of this model

series.

•

This pump is not suitable for work which takes place in explosive environments.

•

ALWAYS stand the pump on a stable level surface during operation.

•

To protect your warranty, only use the hydraulic oil grade as specified in Section 5.4

•

Beware of hot surfaces on the engine.

•

Engine exhaust fumes are poisonous. Do not use the pump indoors.

Stop the engine when carrying out maintenance or adjustments (except pressure relief valve

adjustments). For details on engine operation refer to engine manufacturers instructions.

Hi-Force declares that this product has been tested and complies with the standards set out in the relevant

EU directives. The EU Declaration of Incorporation / Conformity is included as Annex A to this instruction

document and is supplied with all shipments of this product.

Failure to observe and obey the following safety precautions could result

in property damage, serious personal injury or death;

Failure to observe and obey the following safety precautions could result

in property damage, equipment damage or minor/moderate personal injury.

Operating Instruction Manual:

OM-HPP-01

From Serial Number:

ALL