Hi-Force HTW1000B 사용 설명서 - 페이지 5

{카테고리_이름} Hi-Force HTW1000B에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Force HTW1000B 7 페이지. Manual torque wrench range

6.2 Setting the Torque

Turn the nut on the end of the torque wrench handle until the required setting aligns with the end of the

handle tube.

HTW1000B

Never adjust beyond the marked scale or else calibration will be lost.

On the HTW2000B model there are two adjustment nuts. It is important that both nuts are adjusted equally to the

required torque value.

Select a socket of the correct size for the nut to be tightened, and with the correct size of square drive for the torque

wrench. Ensure the socket is in good condition. Fit the socket to the square drive of the torque wrench. Engage the

socket fully onto the nut and pull the torque wrench smoothly towards you. Make use of the ratchet mechanism to

keep the tool in a comfortable working range. Always pull the wrench squarely from the centre of the handle. HTW-

B models: When the required torque setting is reached, the wrench will "break" in the centre through a large and

easily visible angle. The tool mechanism is designed to ensure a smooth "break" to minimise the risk of the operator

losing balance. When hand pressure is relaxed the tool will reset for the next tightening cycle.

Operating Instruction Manual:

HTW1500B

HTW1800B

OM-HTW-01

HTW2000B

Serial Numbers:

FROM 79107887695