Great Lakes GL36SRD 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Great Lakes GL36SRD에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Lakes GL36SRD 8 페이지. 19" eia srd swing rack
Great Lakes GL36SRD에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지)

페이지 인쇄

OVERVIEW

SRD Swing Racks are designed to securely hold 19" rack mount

equipment, networking equipment, phone equipment, etc. in tight spaces

or closets

Your package should include the folowing items:

COMPONENT

BRACES (TOP & BOTTOM)

SWING RACK SIDE WITH SWING FRAME ATTACHED

SWING RACK SIDE

1/4 - 20 X 1/2" CARRIAGE BOLTS

1/4 - 20 HEX NUTS WITH SERRATED FLANGE

3/8" - 16 SHOULDER BOLTS

#10-32 X 1/2" LONG, BLACK SCREWS

TOOLS REQUIRED: 7/16" NUT DRIVER, PHILLIPS HEAD

SCREWDRIVER

MOUNTING INSTRUCTIONS

Wood Studded Wall

Once the location on the wall has been determined, inspect the wall

surface. The wall must be flat and square in the horizontal and vertical

plane to ensure the SRD Swing Rack closes correctly. If the wall is not

flat and square, you might need to use shims.

Wood studded wall mounting instructions apply to a 2" x 4" wood stud

wall with ¾" plywood.

Mounting Hardware for Wood Studded Wall

GL24SRD

GL36SRD

GL48SRD

Masonry Wall Surface

For a masonry wall surface, the installer must provide all the appropriate

hardware.

WARNING: Improper handling and use of the EN enclosure could result in

equipment damage, serious injury, or possible death.

Qty (4) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer

Qty (8) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer

QTY.