Hi-Force JCS10 사용 설명서 - 페이지 6

{카테고리_이름} Hi-Force JCS10에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Force JCS10 12 페이지. Compact jacks - solid piston
Hi-Force JCS10에 대해서도 마찬가지입니다: 사용 설명서 (2 페이지)

페이지 인쇄

5.1 Before Each Use



Check the selected jacks load rating before use.



Ensure the jack is in good condition.



Check the external surfaces for signs of mechanical damage and/or oil leaks. If either is present,

DO NOT use the equipment until it has been serviced and returned to its proper operating condition.



Ensure the external surfaces are dirt free.

5.2 Filling with Oil

Hi-Force JCS Jacks are despatched from the factory pre-filled with oil, and ready for use. If at some stage

the jack requires to be topped up with oil, proceed as follows;



Place the jack on its back edge with the oil filler port facing upwards.



Remove the oil filler port plug (5)



Top up with high grade ISO15 hydraulic oil.



Replace the oil filler plug (5)



Wipe away any excess oil that may have spilt on the jack exterior.

Operating Instruction Manual:

OM-JCS-01

5.0 Installation/Setup

Serial Number:

6. Base plug

ALL