Gaggenau CE 261 사용 설명서 - 페이지 12

{카테고리_이름} Gaggenau CE 261에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau CE 261 16 페이지. Glass ceramic cooktop
Gaggenau CE 261에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄

Safety shut-off

A cooking zone is automatically switched off if the

setting is not changed for a long time. The time when

the safety shut-off is activated depends on the heat

setting selected (1 to 10 hours).

The cooking zone is switched off and the residual heat

indicator lights up on the heat setting display until the

cooking zone cools down.

You can switch the cooking zone back on again as

normal.

Display

Function

™‚

Activation

The activation is not activated when you switch on

the hob, and can be activated.*

The activation is activated when you switch on the

hob, and can be deactivated.

When you switch on the hob, the last state that

was used is set.

™ƒ

Button tones

‹

Key tones off.

‚

Key tones on.*

™„

Child lock

‹

Child lock cannot be activated.*

‚

Child lock can be activated.

™...

Reset all values

Values do not correspond to the factory setting.

™†

Selection time for selecting the cooking zone

Selection time 5 seconds.*

£.

Endless selection time.

*Factory setting

Options menu

In the options menu, you can adjust the following

functions for your cooktop:

▯

Activation

▯

Key tones

▯

Childlock

▯

Reset all values

▯

Selection time for selecting the cooking zone

Settings in the options menu

This table contains all of the functions and information

for making settings:

Information about making settings

The activation can be set individually for each cook-

ing zone that has activation. First, select the desired

cooking zone. Then use the @ symbol to select the

required setting.

Select the desired setting.

Note: This setting does not affect the audible timer

signals, warning signals or the main switch signal.

To be able to use the child lock, you must first ena-

ble this function in the options menu.

You can use this function to reset all of the values in

the options menu and the boiling times to their fac-

tory settings.

Reset all values: press the number 1 button. On the

display, a dot appears beside š.

Note: The values will only be reset when you save

and exit the options menu. If there is already a dot

displayed next to š, all settings already correspond

to the factory setting.

If you select a cooking zone, you must set the heat

setting within the selection time. If the selection

time is set to endless, you can change the heat set-

ting at any time without having to reselect the cook-

ing zone.