Gaggenau CE 261 사용자 설명서 - 페이지 10
{카테고리_이름} Gaggenau CE 261에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau CE 261 16 페이지. Glass ceramic cooktop
Gaggenau CE 261에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)
페이지 인쇄
en Wipe protection
10 Wipe protection
Wiping over the control panel while the hob is switched
on may alter settings. Your hob has a wipe protection
function to prevent this.
The main switch is excluded from the wipe protection
function. You can switch the hob off at any time.
11 Basic settings
You can configure the appliance to meet your needs.
11.1 Overview of the basic settings
You can find an overview of the basic settings and the
default factory settings here.
Dis-
Selection
play
Automatic childproof lock
– Switched off
– Switched on
– Manual and automatic childproof lock are
switched off.
Signal tone
– Confirmation signal and operating error
signal are switched off. The main switch sig-
nal remains switched on.
– Only the operating error signal is
switched on.
– Only the confirmation signal is switched
on.
– Confirmation signal and operating error
signal are switched on.
Automatic timer
- Switched off.
-
- Cooking time after which the hotplates
switch off.
Duration of the timer end signal
– 10 seconds.
– 30 seconds.
– 1 minute.
Activation of the heating elements
– Switched off
– Switched on
– The last setting before switching off the
1
hotplate.
Time for selecting hotplates
– Unlimited: The last hotplate selected can
always be adjusted without having to select it
1
again.
– You can adjust the last hotplate selected
within 10 seconds after selecting it. After this
time you have to select the hotplate again be-
fore adjusting it.
1
Factory setting
10
1
1
1
1
10.1 Activating wipe protection
Touch
.
▶
a A signal will sound.
a The indicator lamp above
a The control panel is locked for 30 seconds.
Dis-
Selection
play
Resetting to the factory settings
– Switched off.
– Switched on.
1
Factory setting
11.2 Changing basic settings
Requirement: The hob is switched off.
Switch on the hob.
1.
Within the next 10 seconds press and hold
2.
approx. 4 seconds.
and
flash alternately on the left-hand display.
a
lights up on the right-hand display.
a
Touch
repeatedly until the required indicator ap-
3.
pears on the left-hand display.
Set the required value on the control panel.
4.
Press and hold
for 4 seconds.
5.
a The setting is activated.
Tip: To exit the basic settings, switch off the hob using
. Switch the hob on again and reset.
lights up.
1
for