Hi-Force TLE50 Series 사용 설명서 - 페이지 5

{카테고리_이름} Hi-Force TLE50 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Force TLE50 Series 18 페이지.

NEVER lift, carry or move any hydraulic components by the hose or hoses connected to them.
Avoid damaging hydraulic hoses. ALWAYS route hoses to ensure that they are free from sharp
bends and kinks. Using a sharply bent or kinked hose will result in severe back-pressure, which can
lead to hose failure.
NEVER use a coupler/s to lift, carry or position a tool.
Servicing of hydraulic equipment must only be undertaken by a qualified technician.
DO NOT let familiarity gained with any hydraulic tools allow you to become complacent.
Complacency with any tooling can result in a lack of discipline toward working guidelines and safety
principles.
DO NOT remove any labels from the product. Replace any damaged or unreadable labels
immediately.
Avoid loose clothing and jewellery that could get caught in moving parts, tie back long hair.
2.5 ToughLift Specific Safety Precautions
DO NOT work under or near a load supported only by hydraulic means. A hydraulic cylinder/ jack,
when used as a lifting device, should not be used as a load-holding device. Once lifted, all loads
should be supported using rigid mechanical structures.
ALWAYS place the unit on a flat, even surface that can support the load to be applied.
Where applicable, use an additional cylinder support base to assist in supporting the load to be
lifted.
Failure to observe and obey the following safety precautions could result
in property damage, equipment damage or minor/ moderate personal
injury;
DO NOT
drop or place heavy objects on a hydraulic hose, as this may cause
internal damage, which could result in rupture of the pressurised hose. A
ruptured hose could cause significant damage to components and possible
severe injury to personal operating nearby.
Failure to observe and obey the following safety precautions could result
in property damage, serious personal injury or death;
Operating Instruction Manual:
OM-TLE50-01
5
From Serial Number:
All