Great Lakes GL840EZ-2442S 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} Great Lakes GL840EZ-2442S에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Lakes GL840EZ-2442S 17 페이지. Ez seismic cabinet

TOP PANEL MOUNTING

The top panel of the cabinet is

installed at the manufacturer.

Removing the top panel can

be done by removing the four

#10-32 x 1/2" lg screws.

Then simply lift the top

panel out or off.

There are 6 top panel options (The TPES-S Solid Top Panel is standard)

for the EZ cabinet:

TPES-S

TPES-P

Solid

Perforated

Standard

RAIL ADJUSTMENT

The EZ cabinet comes standard with 19" 310-E compliant, 3/8" SQ hole

mounting rails. These rails are fully adjustable front to back. To adjust

rails, loosen the ¼-20 hardware using a 3/8" socket and slide them

to the desired position. (There are "tabs" in the horizontal mounting

brackets – if adjustment is required past these tabs, loosen and

remove the hardware then reinstall)

1/4 - 20 Locking

Flange Nut

Top & Bottom Rail Mounting

TPES-F

Three,

75 CFM Fans

1/4 - 20 Hex

Head Bolt

1/4 - 20

Carriage Bolt

#10-32 x 1/2"

Pan Head

Screws

TPES-F10

TPES-2F10

One, 10" 550 Two, 10" 550

CFM Fan

1/4 - 20 Sliding

Nut Plate

Center Rail Mounting

TPES-B

Grommet

CFM Fans

Brush