Hi-Force HPS750 사용 설명서 - 페이지 9

{카테고리_이름} Hi-Force HPS750에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Force HPS750 14 페이지. Single-acting, low height pad cylinders

5.3 Bleeding Trapped Air from the System

The bleeding of trapped air from a hydraulic system must only be performed by qualified

personnel who have been trained and are competent to do so.

Cylinder and hoses are not always completely filled with oil when new. For safe and efficient operation,

trapped air must be removed from the system. The follow procedure must be carried out with the cylinder/s

connected to the pump, but not operating under load.

To remove air from the system, proceed as detailed below:

Figure 5.2

Figure 5.3

5.4 Mounting the Cylinder.

Refer to the Hi-Force Website or the latest Hi-Force Catalogue for Thread size and bolt spacing dimensions.

 Make sure the pumps oil filler breather cap is fitted. (if applicable)

 With all hydraulic connections made, position the cylinder/s below the level of the

hydraulic pump, as illustrated in figure 5.2.

Double-Acting: If possible, position double-acting cylinders on their side with the

couplers facing upward, as illustrated in figure 5.3.

Using the pump, fully advance and retract the cylinder/tool piston several times until

the operation is smooth. (Refer to the pumps operating manual for details of pump

operation).

Operating Instruction Manual:

OM-HPS-01

Serial Numbers:

From: AF0316