Great Lakes SRD Series 설치 지침 매뉴얼 - 페이지 2
{카테고리_이름} Great Lakes SRD Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Lakes SRD Series 12 페이지. 19" eia swing rack for ul60950-1/ul2416 equipment
페이지 인쇄
PREFACE
This manual is provided to prevent service personnel from committing an
act that results in the risk of fire, electric shock, or injury to persons. Only
trained service personnel should receive, unpack, and assemble the Swing
Racks. In addition, only trained service personnel should install equipment in
enclosures.
SAFETY SYMBOLS USED IN THIS MANUAL
This manual provides general safety guidelines to be observed during
installation, operation, and maintenance of the Swing Racks.
WARNING: Failure to follow directions in the warning could result in injury to
persons or loss of life.
CAUTION: Failure to follow directions in the caution could result in damage to
equipment or storage data.
SAFETY CONSIDERATIONS
WARNING: Improper handling and use of the Swing Racks could result in
equipment damage, serious injury, or possible death.
Only UL® Listed ITE (Information Technology Equipment) units should be
installed inside the Swing Rack.
Be sure to read and follow all individual manufacturer equipment manuals for
safety and installation instructions.
Proper spacing is required when installing electrical equipment to avoid
electrical shock. Maintain minimum spacing between the accessories and
components and the computer enclosure assembly for safe operation of the
equipment when installed in accordance with the National Electric Code ANSI/
NFPA 70-1999.
The ambient temperature operating range for the Swing Racks and
accessories is +50 to +95°F (+10 to +35°C).
The non-operating temperature is -4 to +140°F (-20 to +60°C)
SERVICE
The SR Swing Rack should be repaired by personnel trained by Great Lakes,
or returned to Great Lakes for repair or replacement. Contact Great Lakes
Technical Support at 814.734.7303 or at GreatCabinets.com
2