Great Lakes VRX Highlander 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} Great Lakes VRX Highlander에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Lakes VRX Highlander 16 페이지. Variable depth racks

STEP 1 CONTINUED

•

To assemble a cross member and extension bar, determine the desired rack depth (See

DIAGRAM A, page 4).

•

Insert the small square tab of the rear member cross piece into the correct square hole on the

extension bar.

•

Push down on the cross member so that the tab is inserted firmly into the extension bar hole

•

Install M6 bolt and nut in square hole between tabs shown in DIAGRAM D.

•

Once the cross members and extension bars have been assembled, the variable depth cross

member assembly can be mounted to the uprights (see DIAGRAM E & F, page 8).

Carriage

Bolt

Front

Extension

Bar

DETAIL RTL & RBR

REAR TOP LEFT &

REAR BOTTOM RIGHT

DIAGRAM D

Rear Cross

Member

1M6 Nut

DETAIL RBL & RTR

REAR BOTTOM LEFT &

REAR TOP RIGHT

Note orientation of left and

right cross members as

well as which direction the

assembly should be facing

(front or rear).