Great Lakes WR2 설치 지침 매뉴얼 - 페이지 2

{카테고리_이름} Great Lakes WR2에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Lakes WR2 8 페이지. Ul60950-1/ul2416 e series equipment cabinet/rack

PREFACE

This manual is provided to prevent service personnel from committing

an act that results in the risk of fire, electric shock, or injury to persons.

Only trained service personnel should receive, unpack, and assemble

the Great Lakes Wall Mount. In addition, only trained service personnel

should install equipment in enclosures.

SAFETY SYMBOLS USED IN THIS MANUAL

This manual provides general safety guidelines to be observed during

installation, operation, and maintenance of the Great Lakes WR Wall

Mount.

WARNING: Failure to follow directions in the warning could result in

injury to persons or loss of life.

CAUTION: Failure to follow directions in the caution could result in

damage to equipment or storage data.

SAFETY CONSIDERATIONS

WARNING: Improper handling and use of the Great Lakes Wall Mount

could result in equipment damage, serious injury, or possible death.

Only trained service personnel should be used to remove the

enclosure from the pallet. Also, be sure you have a sufficient number

of service personnel. Do not attempt to move enclosures by yourself.

Only UL

Listed ITE (Information Technology Equipment) units should

be installed inside the Great Lakes WR Wall Mount.

Be sure to read and follow all individual manufacturer equipment

manuals for safety and installation instructions.

Proper spacing is required when installing electrical equipment

to avoid electrical shock. Maintain minimum spacing between the

accessories and components and the computer enclosure assembly

for safe operation of the equipment when installed in accordance with

the National Electrical Code ANSI/NFPA 70-1999.

The ambient temperature operating range for the Great Lakes WR Wall

Mount and accessories is +50 to +95° F (+10 to +35° C).

The non-operating temperature is -4 to +140° F (-20 to +60° C).