Gaggenau KG 291 CA 작동 및 설치 매뉴얼 - 페이지 9

{카테고리_이름} Gaggenau KG 291 CA에 대한 작동 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau KG 291 CA 18 페이지. Gaggenau gas cooktop brochure
Gaggenau KG 291 CA에 대해서도 마찬가지입니다: 사양 (1 페이지)

페이지 인쇄

4. Operation

Only light a burner if all burner parts are dry, and

assembled correctly. Otherwise, malfunctions may

occur or the appliance may switch off.

Switching on

• Place a suitable pot or a pan on the corresponding

cooking position.

• Press down the control knob for the corresponding

cooking position and turn it to the required

position between the

ignites automatically.

• When using large pots or pans you should ignite

the burner in the low position.

• Every time the gas hob is switched on, the

electronics run an auto test. All electrodes fire

and the required burner ignites after a few

seconds. When switching on further burners, only

the corresponding electrode fires.

• When being switched on, a short sound may be

heard when the electronic of the gas hob opens

the gas supply valve. This is a normal condition.

The flame size can be set continuously between full

and low by slowly turning the control knob.

Indicator light

The indicator light next to the control knob comes

on, if the burner is switched on and the flame burns

correctly.

Should the flame go out during operation (e.g.

because of a draught), the appliance will

automatically re-ignite the burner.

Should the re-ignition be unsuccessful (e.g. burner

is soiled by spilled over food or liquid), all burners

are switched off, the indicator lights of the burners

that were switched on flash. Turn all control knobs

to the OFF position. The flashing indicator lights will

go out except for the affected burner. This indicator

will continue to flash for a few seconds. After the

and symbols. The burner