Gaggenau VE 260 사용 설명서 - 페이지 15
{카테고리_이름} Gaggenau VE 260에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau VE 260 16 페이지. Glass ceramic cooktop
페이지 인쇄
Care and cleaning
In this chapter you will find tips on how to maintain and clean
your appliance correctly.
:
Risk of burns!
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
:
Risk of electric shock!
Penetrating moisture may cause an electric shock. Do not
use any high-pressure cleaners or steam cleaners.
Cleaning the appliance
Clean the appliance after every use once it has cooled down.
Remove spills immediately. Burnt in residues may be difficult
to remove.
Part/surface
Recommended cleaning method
Glass ceramic
Apply glass ceramic cleaner with a
moist, soft cloth and wipe clean; then
remove the cleaner with a moist cloth.
Dry and polish with a soft cloth.
You can order a suitable glass ceramic
cleaner (order number 311298) from
your specialist retailer or online.
Remove burnt-in residues immediately
with a glass scraper (order number
087670). Hold the glass scraper at a
gentle angle when cleaning the cook-
top.
Control panel
Clean with a soft, moist cloth and some
soapy water; do not use too much water.
Dry with a soft cloth.
Immediately remove residues of food
containing acid from the control panel
(e. g. vinegar, ketchup, mustard,
marinade).
You can order a suitable care product
for the control panel (order number
311135) from your specialist retailer or
online. Apply the care product evenly
with a soft cloth on the control panel
after cleaning.
Do not use the glass scraper or the
glass ceramic cleaner on the control
panel.
Control knobs
Clean with a soft, moist cloth and some
soapy water; do not use too much water.
Do not use these cleaning agents
▯
Scouring or chemically aggressive cleaners
▯
Acidic cleaners (e.g. vinegar, citric acid, etc)
▯
Cleaners containing chlorine or with a high content of
alcohol
▯
Oven cleaner
▯
Hard and scratchy sponges, brushes or scouring pads
▯
Thoroughly wash out new sponge cloths before using
them.
After-sales service
In the event of repairs please contact our after-sales sevice.
We are committed fo find the best solution also in order to
avoid an unnecessary call-out.
Please quote the E number (product number) and the
FD number (production number) of your appliance when
contacting the after-sales service. The rating plate bearing
these numbers can be found on the bottom of the appliance.
For future reference you can note the data of your appliance
and the telephone number of our after-sales service below.
E-Nr.
After-sales service O
Please note that calling out an after-sales service technician
is not free of charge, even within the warranty period, should
the problem result from an operating error.
Please find the contact data of all countries in the enclosed
customer service list.
To book an engineer visit and product advice
GB
0844 89289988
Calls from a BT landline will be charged at up to 3
pence per minute. A call set-up fee of up to 6 pence
may apply.
IE
01450 2655
AU
1300 727 421
NZ
09 477 0492
Trust the expertise of the manufacturer, and rest assured that
the repair will be carried out by trained service technicians
using original spare parts for your domestic appliance.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our trained after-sales engineers. If the
appliance is faulty, unplug the mains plug or switch off the
fuse in the fuse box. Contact the after-sales service.
FD-Nr.
15