Daxten VOYAGER SERIAL 브로셔

{카테고리_이름} Daxten VOYAGER SERIAL에 대한 브로셔을 온라인으로 검색하거나 PDF를 다운로드하세요. Daxten VOYAGER SERIAL 2 페이지.

Voyager serial

Addendum for Voyager UTP Extenders

with Serial Link Option

This extender contains daughter boards that allow a full-duplex serial data link to be

maintained across the CAT5 interconnection cable in addition to PS/2 keyboard/mouse

and SuperVGA video.

To set-up your extender for keyboard/mouse/video please follow the instructions detailed

in the user's manual. To set-up the extender's serial link, please follow the instructions

detailed in this addendum. If you have any questions, contact your dealer.

Serial Option Specification

Baud Rates Supported:

Serial Data Format:

Flow Control:

Local Unit Connector:

Remote Unit Connector:

Serial Cable (Supplied):

Typical Applications:

Serial Mouse:

Setting Up and Operation

For the vast majority of typical applications the default settings (9600 Baud, No Hardware

Flow Control) will suffice. Simply set-up your extender as detailed in the manual and

connect the required serial peripheral.

Please bear in mind that the Remote Unit's serial port is wired as DTE (i.e. the same as

that on a PC). To connect a serial printer (or other DTE rather than DCE device) to the

Remote Unit. you will need a Null-Modem (crossover) cable between the Remote Unit

and the printer. Select Xon/Xoff software flow control on the printer and PC.

A serial Touchscreen may be plugged directly into the Remote Unit.

Daxten Ltd

4 Harp Business Centre

Apsley Way

London NW2 7LW

9600 Baud (Default) and 19200 Baud (Jumper Selectable)

8-N-l (8 Data Bits, No Parity, 1 Stop Bit)

RTS/CTS or DTR/DSR (Jumper Selectable)

Default Setting: Handshaking is not enabled.

DB9 Female (DCE)

DB9 Male (DTE)

DB9 Male-Female, 1.8m (3'), Wiring 1:1 (DTE-DCE)

For use between the CPU and Local Unit

Touchscreens, Serial Printers, Industrial Control

Not supported as standard. Please see note below.

Tel.: +44 (0)20 8438 3800

Fax: +44 (0)20 8438 3899