Gaggenau VG 232 AU 지침서 - 페이지 10
{카테고리_이름} Gaggenau VG 232 AU에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau VG 232 AU 19 페이지. Built-in gas cooktop
Gaggenau VG 232 AU에 대해서도 마찬가지입니다: 지침서 (19 페이지)

4. Cleaning and care
Fig. 7
Wipe off any spillage caused by a pan boiling over
immediately, thus ensuring that it cannot burn in on
the hob.
Caution!
The burners get very hot during operation!
Never use abrasive or caustic cleaning agents.
You should only clean the control panel and the
control knobs with detergent and a soft cloth.
To ensure perfect functioning, keep the thermal
sensor and the spark plug clean.
Keep the incoming air openings on the rear of
the panel unobstructed and clean.
10
All manuals and user guides at all-guides.com
1
2
Please thoroughly clean the appliance before
operating it for the first time and after
every use.
– Wait until the appliance has cooled down.
– Remove the pot grid.
– Remove the burner covers.
– Clean the hob, the burner covers and the
pot grid with commercially available cleaning
agents (not in a dishwasher!), e.g. with warm
soap solution and a dishwashing brush.
– Whenever required, clean the burner head with
a moist cloth.
– Allow burnt-in remainders to soak with a little
water and detergent. This loosens even the most
stubborn of soiling. Do not use any abrasive
agents and abrasive sponges.
– As the result of heat development, slight
discoloration can appear on the stainless steel
surface. Do not attempt to scrape away such
discoloration. This damages the surface.
Distribute stainless steel care agents uniformly
and thinly on the hob (not on the control panel!).
This will ensure an even surface and will keep
your hob in a good condition for a long period of
time.
Important: Allow the burner covers to cool down
before cleaning them!
When assembling, place the burner covers (1) on
the burner heads (2) so that the four tabs on the
bottom edge of the burner cover engage in the
corresponding tabs on the burner head (see Fig. 7).
Place the pot grid back in position.
Caution:
Never use high-pressure or steam jet units to
clean your appliance because otherwise the
electrical safety of the appliance will no longer
be guaranteed.