Daxten SCOUT 16 설치 매뉴얼 - 페이지 3

{카테고리_이름} Daxten SCOUT 16에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Daxten SCOUT 16 8 페이지. 8 / 16 port kvm switch

페이지 인쇄

SCOUT 8 & SCOUT 16

Introduction

Thank you for purchasing the SCOUT 8 / SCOUT 16, KVM Switch. This product will ensure easy and

accurate control over your PCs through a single console. The SCOUT is compatible with PS/2 style

computers. It has keyboard and mouse emulation for error free boot-ups and supports a wide variety

of mice. The SCOUT supports high resolutions of up to 1920 x 1440 without any deterioration of the

image quality. Switching between PCs can be accomplished in three ways: through keyboard Hot Key

commands, by using the convenient front panel selection buttons or through the OSD (On-Screen-

Display).

Product Features

8 or 16 port SCOUT Switch with On-Screen-Display - OSD

PS/2 connectors for Keyboard and Mouse

15 pin VGA connector

Cascadable up to 256 Computers

19" Rack-mount-kit included

Switching by front-panel push buttons, OSD or hotkeys

LED indicators

Resolution up to1920 x 1440 @ 85 Hz

Comes with Auto-Scan mode for convenient automatic switching.

Front panel status LEDs give a clear indication of the active PC.

Optional PS/2 to USB adaptor for USB Computers (2141-01U)

Hardware Installation

Installation

Before connecting your computers and console devices to the SCOUT switch, please ensure

that all devices are powered off. Connecting devices while powered on may lead to damage

to your computers or the SCOUT switch. Daxten cannot be held responsible for damage

caused by connecting devices that are powered.

Connect your keyboard, monitor and mouse to the console connectors on the rear of your

SCOUT switch.

Connect each computer system to the SCOUT Switch.

Power on the SCOUT Switch by attaching the power adapter cord.

Daisy-chain Multiple SCOUT Switches

Make sure your SCOUT Switch, your PCs and peripherals are all in powered-off state. If not,

turn the power off for the SCOUT Switch, PCs and peripherals.

Connect the shared keyboard, PS/2 mouse and monitor to the console connectors on the

rear of the master (first) SCOUT Switch.

Connect the power adapter cord to power on the master SCOUT Switch.

Use a daisy-chain cable to connect the daisy-chain port (labelled daisy-chain in) of the

master switch to the console port of the second switch. Then connect the power cord to

power on the second SCOUT Switch.

If you are cascading more SCOUT switches, just repeat step 4.

Connect each computer system (still in powered-off state) in turn with your Combi CPU

Cable. Then power on each computer.

After you have set up and powered up the daisy-chain connection of the SCOUT Switches,

you have to perform a first-time initialization for all the switches either by pressing and

holding down Button 1 on the master switch for at least 2 seconds, or using the hotkey

sequence: Scroll Lock Scroll Lock End for daisy-chain initialization.