Gaggenau VG 264 RK 사용 설명서 - 페이지 18
{카테고리_이름} Gaggenau VG 264 RK에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau VG 264 RK 20 페이지.
페이지 인쇄
Do not use these cleaners
scouring or chemically aggressive cleaners
▯
cleaners containing acid (e.g. vinegar, citric acid,
▯
etc)
cleaners containing chloride or with a high content
▯
of alcohol
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
Fault
Malfunction of the
general electrical sys-
tem.
The electric ignition
does not work.
The burner flame is
not uniform.
The gas flow is not
normal or there is no
gas.
The kitchen smells of
gas.
The burner goes off
after ignition.
18
Possible cause
The household fuse has tripped.
There may be food or cleaning products
stuck between the ignition sparkers and the
burners.
The burners are wet.
The burner caps are not correctly posi-
tioned.
Power cut
The burner components are not correctly
positioned.
The grooves on the burner are dirty.
The gas supply is blocked via gas taps.
If the gas is supplied from a gas cylinder,
check that this is not empty.
There may be a leak in the gas cylinder cou-
pling.
The control knob was not held down for long
enough.
The grooves on the burner are dirty.
oven cleaner
▯
hard and scratchy sponges, brushes or scouring
▯
pads
carefully rinse new sponge clothes before the first
▯
use
Solution
Check the fuse box if the fuse has tripped.
The space between the ignition sparker and
the burner must be clean.
Dry the burner caps carefully.
Check that the burner caps are correctly
positioned.
Ignite the burner with a lighter or a match.
Ensure the components are correctly posi-
tioned.
Clean the grooves on the burner.
Open all gas taps.
Change the gas cylinder.
Check that the coupling is sound.
Once the burner is on, hold the control knob
down a few seconds longer. Fully press con-
trol knob.
Clean the grooves on the burner.