Daxten SCOUTCOMBO 8 - 설치 매뉴얼 - 페이지 4
{카테고리_이름} Daxten SCOUTCOMBO 8 -에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Daxten SCOUTCOMBO 8 - 10 페이지.
페이지 인쇄Keyboard Hot Key commands
To send Hot Key commands to the SCOUTcombo switch,
press and release Scroll Lock
Enter, for the desired effect. The following commands are supported:
First Key
Second Key
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
OSD menu
Press Scroll Lock
will display the OSD‟s Main Menu
The OSD Main Menu shows the channel
number, name, selected channel row
(highlighted), Servers that are powered on and
available (
), Channels that are cascaded.
You can exit the OSD menu by pressing Esc
or Enter to leave the OSD to the selected
server.
You can use the and arrow keys to
highlight a computer, and Enter will select it
and leave the OSD.
Where a server is connected and powered on, the following symbol will appear
corresponding front panel indicator will turn green.
When a channel is cascaded a will appear to the left of the name.
When running the OSD on a cascaded switch, a number will appear in the top left corner of the OSD
menu (below the KVM layer number), indicating the parent port. E.g. 8 indicates that the switch is
cascaded on port 8. On a master switch this will remain blank.
Scroll Lock within 5 seconds. Press a command key followed by
Command Key
Enter
1 Enter
......
1
16 Enter
S Enter
H Enter
K Enter
Scroll Lock Enter , this
Command Result
Display‟s the OSD menu
Switches to PC connected to port 1
Switches to the desired PC
Auto-Scan mode ON
Console Lock
Changes Hot Key- Cycles through
Scroll Lock, Caps Lock or Ctrl as
Hot Keys.
User OSD
and the